Safety Stop Clamp for Microscope Track Stand

In Stock

Log in for pricing

Write a Review
SKU:
SA02131101
Condition:
New
Warranty:
1 Year
  • Safety Stop Clamp for Microscope Track Stand


Quick Overview
Lock Ring Opening Size: 31mm. For ST0203, ST0204 Series Track Stand.

SA02131101 Safety Clamp for Track Stand
Lock Ring
Lock Ring Opening Size31mm
Surface TreatmentElectroplating
MaterialMetal
ColorSilver
Net Weight0.12kg (0.26lbs)
Applied FieldFor ST0203, ST0204 Series Track Stand

 


Technical Info

Instructions
Lock RingClose Λ
Lock right is installed under the pole focusing mechanism. This ring needs to be placed tightly on to the lower part of the motion focusing mechanism.
This device has two functions:
First, when the body of the microscope is relatively heavy, the microscope and the focusing mechanism are protected by way of support and prevention from falling off, so that it does not fall down. However, it is still necessary to tighten the focusing mechanism, and one cannot completely rely on the support and protection of this device.
Second, is to determine the position of the lower limit of the focusing mechanism. When moving the focusing mechanism to reach this position, the lock ring does not allow it to exceed this position, thus avoiding bumping against the underlying object to be observed or the bottom plate of the stand because of misoperation or the sudden falling of the microscope.
PackagingClose Λ
After unpacking, carefully inspect the various random accessories and parts in the package to avoid omissions. In order to save space and ensure safety of components, some components will be placed outside the inner packaging box, so be careful of their inspection.
For special packaging, it is generally after opening the box, all packaging boxes, protective foam, plastic bags should be kept for a period of time. If there is a problem during the return period, you can return or exchange the original. After the return period (usually 10-30 days, according to the manufacturer’s Instruction of Terms of Service), these packaging boxes may be disposed of if there is no problem.
Packing  
Packaging TypeCarton Packaging
Packaging MaterialCorrugated Carton
Packaging Dimensions(1)6x6x4.5cm (2.362x2.362x1.771″)
Inner Packing MaterialPlastic Bag
Ancillary Packaging MaterialsStyrofoam
Gross Weight0.13kg (0.29lbs)
Minimum Packaging Quantity1pc
Transportation CartonCarton Packaging
Transportation Carton MaterialCorrugated Carton
Transportation Carton Dimensions(1)15.2x15.2x15.2cm (6x6x6″)
Total Gross Weight of Transportation(kilogram)0.27
Total Gross Weight of Transportation(pound)0.60

Related Products