LED Video Microscope, LCD 10 in. Monitor, Industrial Inspection, Boom Stand

Specifications
Packing List
Suggested Accessories

Instruction Manual
MV0201 Video Microscope Instruction Manual-English.doc

Quick Overview
Infinite. Total Magnification: 14.8-95X. 1X Semi Plan Achromatic Objective. Standard Coupler: 0.5X. Zoom Ratio: 1:6.5. Body Mounting Size for Stand: Dia. 76mm. Magnification Detent : 0.5X per pre-set stop. Boom Stand. Illumination Type: LED Reflection Light. Top Illumination: Ring Light. CCD. CC4/S-Video. Screen Size: 10in. Input Voltage: AC 100-240V 50/60Hz. Pointer Light Waves Type: Laser.
Suggested Applications
Industrial , Aerospace, Dental Lab & Production, Mechanical Parts, Medical & Microbiology , Medical Devices

MV02010203 10 in. Video Microscope

Optical System Specifications

Optical System	Infinite
System Optical Magnification	0.35-2.25X
System Electronic Magnification	42.33X (1/3 in. Camera 10 in. Monitor)
Total Magnification	14.8-95X
Standard Objective	1X Semi Plan Achromatic Objective
Standard Coupler	0.5X
System Field of View	Dia. 2.6-17.5mm
Expandable System Field of View	Dia. 1.3-81mm
System Working Distance	97.3mm
Expandable System Working Distance	46-331mm

Video Monocular Zoom Body

10" Video Microscope Body
Body Optical System	Infinite
Body Magnification	0.7-4.5X
Zoom Range	0.7-4.5X
Zoom Ratio	1:6.5
Zoom Operating Mode	With the Zoom Ring
Body Mounting Size for Stand	Dia. 76mm
Magnification Detent	0.5X per pre-set stop
Objective Screw Thread	M24x0.75mm
Illumination Type	LED Reflection Light
Top Illumination	Ring Light
Top Illumination Type	LED
Coupler Magnification	0.5X
Image Sensor	CCD
Image Sensor Size	1/3 in.
Image Sensor Diagonal size	6mm (0.236 in. )
Camera Resolution	480 TV Lines
Camera Signal Output Port	CC4/S-Video
Camera Video Signal Format	NTSC
Camera Lens Mount	C-Mount
White Balance	Auto
Gain Control	Adjustable
Screen Size	10in
Screen Aspect Ratio	4:3
Monitor Input Signal Format	AV
Monitor Signal Format	NTSC
Monitor Max. Resolution	1024x768
Screen Active Area	210x160mm (6.268x6.299 in. )
Screen Contrast	350:1
Screen Brightness	300cd/m2
Response Time	16ms
Screen Viewing Angle	150°
Screen Backlight	LED Display
Screen Crosshairs	1 Fixed Crosshair
Monitor Operating Temperature	10°C~40°C
Monitor Operating Humidity	10%-80%
Monitor Housing Material	Plastic
Monitor Housing Size	245x200x40mm
Monitor Housing Color	Black
Input Voltage	AC 100-240V 50/60Hz
Output Voltage	DC 12V
Power Cord Connector Type	USA 3 Pins
Power Cable Length	1.8m
Surface Treatment	Spray Paint
Material	Metal
Color	White
Net Weight	2.22kg (4.89lbs)

Monocular Video Microscope Objective

1X Objective
Objective Optical System	Infinite
Objective Optical Magnification	1X
Objective Type	Semi-Plan Achromatic Objective
Objective Working Distance	97.3mm
Objective Screw Thread	M24x0.75mm
Objective Outer Diameter	Dia. 30mm
Barlow Lens	Yes
Surface Treatment	Electroplating Black
Material	Metal
Color	Black
Net Weight	0.02kg (0.04lbs)
Applied Field	For MZ0201 Series Microscope

Boom Stand

Stand Type	Boom Stand
Vertical Post Height	384mm
Maximum Vertical Post Extended Length	254mm
Vertical Post Diameter	Dia. 37.2mm
Cross Adapter Type	Cross Hole Adapter
Horizontal Arm Type	Horizontal Post
Horizontal Arm Length	544mm
Horizontal Diameter	Dia. 37.2mm
Mounting Hole on the Top of Horizontal Arm	5/8 in. End Adapter
Horizontal Rotation Angle	360° Degree Rotatable
Horizontal Arm Travel Distance on Z-Axis	266mm
Horizontal Arm Stretch Range	480mm
Horizontal Arm Maximum Load	9.50kg (20.94lbs)
Horizontal Arm Travel Mode on Horizontal Direction	Manual
Horizontal Arm Travel Mode on Z Direction	Manual
Base Type	Heavy Duty Base
Base Shape	Rectangle
Base Dimensions	285x260x18mm
Surface Treatment	Electroplating Black
Material	Metal
Color	Black
Net Weight	18.14kg (39.99lbs)
Dimensions	285x260x600mm (11.220x10.236x23.622 in. )

E-Arm

76mm E-Arm
Holder Adapter Type	Dia. 76mm Scope Holder
Focus Distance	50mm
Coarse Focus Distance per Rotation	20mm
E-Arm Rotation Range on Horizontal Direction	360°
E-Arm Rotation Range on Z Direction	180°
E-Arm Mounting Adapter	5/8 in. End Adapter
Center Distance from E-Arm Adapter to Scope Holder	130mm
E-Arm Horizontal Adjustment Screw	Horizontal Adjustable
Safety Protection Against Falling Screw	With Safety protection against falling Screw
Surface Treatment	Spray Paint
Material	Metal
Color	White
Net Weight	0.84kg (1.85lbs)

Laser Pointer

Pointer Type	Independent Use
Mounting Position of Pointer	Mounted on Microscope Stand
Pointer Light Waves Type	Laser
Pointer Light Color	Red
Pointer Light Wavelength	650nm
Pointer Light Shape	Point
Pointer Mounting Type	M4/M5 Fastening Screw
Surface Treatment	Polished
Material	Plastic
Color	Black

Environment Requirement

Operating Temperature	10~40°C (50~104°F)
Operating Humidity	80%

Other Parameters

Surface Treatment	Spray Paint
Material	Metal
Color	White
Net Weight	20.15kg (44.42lbs)
Dimensions	544x285x405mm (21.417x11.220x15.945 in. )

Technical Info

Instructions

Video MicroscopeClose Λ

Video microscope, also known as TV microscope, is a microscope that converts an optical image into a video image. Typically, for video microscope, it is an analog camera that displays an image on a display or on a projection.

InfiniteClose Λ

Microscopes and components have two types of optical path design structures.
One type is finite optical structural design, in which light passing through the objective lens is directed at the intermediate image plane (located in the front focal plane of the eyepiece) and converges at that point. The finite structure is an integrated design, with a compact structure, and it is a kind of economical microscope.
Another type is infinite optical structural design, in which the light between the tube lens after passing the objective lens becomes "parallel light". Within this distance, various kinds of optical components necessary such as beam splitters or optical filters call be added, and at the same time, this kind of design has better imaging results. As the design is modular, it is also called modular microscope. The modular structure facilitates the addition of different imaging and lighting accessories in the middle of the system as required.
The main components of infinite and finite, especially objective lens, are usually not interchangeable for use, and even if they can be imaged, the image quality will also have some defects.

The separative two-objective lens structure of the dual-light path of stereo microscope (SZ/FS microscope) is also known as Greenough.
Parallel optical microscope uses a parallel structure (PZ microscope), which is different from the separative two-object lens structure, and because its objective lens is one and the same, it is therefore also known as the CMO common main objective.

System Optical MagnificationClose Λ

The magnification of the objective lens refers to the lateral magnification, it is the ratio of the image to the real size after the original image is magnified by the instrument. This multiple refers to the length or width of the magnified object.
System optical magnification is the product of the eyepiece and the objective lens (objective lens zoom set) of the optical imaging part within the system.
Optical magnification = eyepiece multiple X objective lens/objective lens set

The maximum optical magnification of the microscope depends on the wavelength of the light to which the object is illuminated. The size of the object that can be observed must be greater than the wavelength of the light. Otherwise, the light cannot be reflected or transmitted, or recognized by the human eye. The shortest wavelength of ultraviolet light is 0.2 microns, so the resolution of the optical microscope in the visible range does not exceed 0.2 microns, or 200 nanometers. This size is converted to the magnification of the microscope, and it is the optical magnification of 2000X. Usually, the compound microscope can achieve 100X objective lens, the eyepiece is 20X, and the magnification can reach 2000X. If it is bigger, it will be called "invalid magnification", that is, the image is large, but the resolution is no longer increased, and no more details and information can be seen.

System Electronic MagnificationClose Λ

The electronic magnification usually refers to the lateral magnification, that is, the ratio of the magnification of the image of the object being observed after passing through the image sensor and the terminal display. This magnification is the digital image magnification and it does not improve the resolution of the original image to the object being observed.
Electronic magnification = display size (diagonal) / camera sensor target (diagonal)

(Appendix) Different Camera Sensor Target Diagonal Conversion Table

Total MagnificationClose Λ

Total magnification is the magnification of the observed object finally obtained by the instrument. This magnification is often the product of the optical magnification and the electronic magnification.
When it is only optically magnified, the total magnification will be the optical magnification.

Total magnification = optical magnification X electronic magnification
Total magnification = (objective X photo eyepiece) X (display size / camera sensor target )

System Field of ViewClose Λ

Field of View, is also called FOV.
The field of view, or FOV, refers to the size of the object plane (i.e., the plane of the point of the observed object perpendicular to the optical axis), or of its conjugate plane (i.e., object to primary image distance), represented by a line value.
System field of view is the size of the actual diameter of the image of the terminal display device of the instrument, such as the size of the image in the eyepiece or in the display.

Field of view number refers to the diameter of the field diaphragm of the objective lens, or the diameter of the image plane formed by the field diaphragm.
Field of view number of objective lens = field of view number of eyepiece / (objective magnification / mechanical tube length)

Large field of view makes it easy to observe the full view and more range of the observed object, but the field of view (FOV) is inversely proportional to the magnification and inversely proportional to the resolution, that is, the larger the field of view, the smaller the magnification, and also the lower the resolution of the object to be observed.
There are usually two ways to increase the field of view, one is to replace with an objective lens of a smaller multiple, or to replace with an eyepiece of a smaller multiple.

System Working DistanceClose Λ

Working distance, also referred to as WD, is usually the vertical distance from the foremost surface end of the objective lens of the microscope to the surface of the observed object.
When the working distance or WD is large, the space between the objective lens and the object to be observed is also large, which can facilitate operation and the use of corresponding lighting conditions.
In general, system working distance is the working distance of the objective lens. When some other equipment, such as a light source etc., is used below the objective lens, the working distance (i.e., space) will become smaller.

Working distance or WD is related to the design of the working distance of the objective lens. Generally speaking, the bigger the magnification of the objective lens, the smaller the working distance. Conversely, the smaller the magnification of the objective lens, the greater the working distance.
When it is necessary to change the working distance requirement, it can be realized by changing the magnification of the objective lens.

Video Monocular Zoom BodyClose Λ

Video monocular zoom body is a zoom body that has only one set of optical paths, and it is also the body of the video continuous zoom.
The upper end of the microscope body can be connected to the standard C-interface photo eyepiece, and then connected to the microscope camera; the lower end is the objective lens, and the objective lens of parallel structure is generally separated from the body, whereas the microscope body of finite structure is combined with the objective lens.
Some bodies of microscope have also a light source coaxial illumination device.

Zoom RangeClose Λ

Zoom in zoom microscope means to obtain different magnifications by changing the focal length of the objective lens within a certain range through adjustment of some lens or lens set while not changing the position of the object plane (that is, the plane of the point of the observed object perpendicular to the optical axis) and the image plane (that is, the plane of the image imaging focus and perpendicular to the optical axis) of the microscope.
Zoom range refers to the range in which the magnification is from low to high. In the zoom range of the microscope, there is no need to adjust the microscope knob for focusing, and ensure that the image is always clear during the entire zoom process.
The larger the zoom range, the stronger the adaptability of the range for microscope observation, but the image effects at both ends of the low and high magnification should be taken into consideration, the larger the zoom range, the more difficult to design and manufacture, and the higher the cost will be.

Zoom RatioClose Λ

Zoom ratio is the ratio of the maximum magnification / the minimum magnification. Expressed as 1: (ratio of maximum magnification / minimum magnification). If the maximum magnification is 4.5X, the minimum magnification is 0.7X, then the zoom ratio = 4.5 / 0.7 = 6.4, the zoom ratio will be 1:6.4.
Zoom ratio is obtained by the intermediate magnification group of the microscope. When the magnification is increased or decreased by using other objective lenses, the zoom ratio does not change accordingly.

Magnification Detent Close Λ

In the body of zoom microscope, zooming is continuous. When rotating to a certain position, generally an integral multiple, a positioning structure or detent is added, which has a distinct hand feel during the zooming process, and stops at this position.
When measuring, or testing by factory for unified standard magnification, a magnification detent device can avoid the error caused by the inaccurate multiple positioning of the optical magnification.

Objective Screw ThreadClose Λ

For microscopes of different manufacturers and different models, the thread size of their objectives may also be different.
In general, the objective threads are available in two standard sizes, allowing similar objectives between different manufacturers to be used interchangeably.
One is the British system: RMS type objective thread: 4/5in X 1/36in,
One is metric: M25 X 0.75mm thread.

Coupler MagnificationClose Λ

Coupler magnification refers to the line field magnification of the coupler/C-mount-adapter. With different magnifications of the adapter lens, images of different magnifications and fields of view can be obtained. The size of the image field of view is related to the sensor size and the coupler/C-mount-adapter magnification.

Camera image field of view (mm) = sensor diagonal / coupler/C-mount-adapter magnification.

For example: 1/2 inch sensor size, 0.5X coupler/C-mount-adapter coupler, field of view FOV (mm) = 8mm / 0.5 = 16mm.
The field of view number of the microscope 10X eyepiece is usually designed to be 18, 20, 22, 23mm, less than 1 inch (25.4mm). Since most commonly used camera sensor sizes are 1/3 and 1/2 inches, this makes the image field of view on the display always smaller than the field of view of the eyepiece for observation, and the visual perception becomes inconsistent when simultaneously viewed on both the eyepiece and the display. If it is changed to a 0.5X coupler/C-mount-adapter, the microscope image magnification is reduced by 1/2 and the field of view is doubled, then the image captured by the camera will be close to the range observed in the eyepiece.
Some adapters are designed without a lens, and their optical magnification is considered 1X.

CCDClose Λ

CCD, charge coupled device.
See CCD and CMOS structure comparison table

Image Sensor SizeClose Λ

The size of the CCD and CMOS image sensors is the size of the photosensitive device. The larger the area of the photosensitive device, the larger the CCD/CMOS area; the more photons are captured, the better the photographic performance; the higher the signal-to-noise ratio, the larger the photosensitive area, and the better the imaging effect.
The size of the image sensor needs to match the size of the microscope's photographic eyepiece; otherwise, black borders or dark corners will appear within the field of view of observation.

Camera ResolutionClose Λ

Resolution of the camera refers to the number of pixels accommodated within unit area of the image sensor of the camera. Image resolution is not represented by area, but by the number of pixels accommodated within the unit length of the rectangular side. The unit of length is generally represented by inch.

Camera Signal Output PortClose Λ

Digital signals output: USB 2.0, USB3.0; 15 Pin VGA; Firewire Port; HDMI; VGA; Camera Link etc.
Analog signal output: BNC; RCA; Y-C etc.
In addition, some cameras store and output images in the form of a memory card. Usually, industrial cameras often have several output modes on one camera for convenience purposes.

Camera Video Signal FormatClose Λ

Camera video signal format usually refers to the video output format of the analog signal: NTSC or PAL

Camera Lens MountClose Λ

Industrial camera adapters are usually available in three types:
1. C-Mount: 1" diameter with 32 threads per inch, flange back intercept 17.5mm.
2. CS-Mount: 1" diameter with 32 threads per inch, flange back intercept 12.5mm.
CS-Mount can be converted to a C-Mount through a 5mm spacer, C-mount industrial camera cannot use the CS-mount lens.
3. F-Mount: F-mount is the adapter standard of Nikon lens, also known as Nikon mouth, usually used on large-sized sensor cameras, the flange back intercept is 46.5mm.

White BalanceClose Λ

White balance is an indicator that describes the precision of white color generated in the image when the three primary colors of red, green and blue are mixed, which accurately reflects the color condition of the subject. There are manual white balance and automatic white balance.
White balance of the camera is to "restore white objects to white color under any light source." The chromatic aberration phenomenon occurred under different light sources is compensated by enhancing the corresponding complementary color. Automatic white balance can generally be used, but under certain conditions if the hue is not ideal, options of other white balance may be selected.

Objective Optical MagnificationClose Λ

The finite objective is the lateral magnification of the primary image formed by the objective at a prescribed distance.

Infinite objective is the lateral magnification of the real image produced by the combination of the objective and the tube lens.
Infinite objective magnification = tube lens focal length (mm) / objective focal length (mm)

Lateral magnification of the image, that is, the ratio of the size of the image to the size of the object.
The larger the magnification of the objective, the higher the resolution, the smaller the corresponding field of view, and the shorter the working distance.

Objective TypeClose Λ

In the case of polychromatic light imaging, the aberration caused by the light of different wavelengths becomes chromatic aberration. Achromatic aberration is to correct the axial chromatic aberration to the two line spectra (C line, F line); apochromatic aberration is to correct the three line spectra (C line, D line, F line).
The objective is designed according to the achromaticity and the flatness of the field of view. It can be divided into the following categories.

Achromatic objective: achromatic objective has corrected the chromatic aberration, spherical aberration, and comatic aberration. The chromatic portion of the achromatic objective has corrected only red and green, so when using achromatic objective, yellow-green filters are often used to reduce aberrations. The aberration of the achromatic objective in the center of the field of view is basically corrected, and as its structure is simple, the cost is low, it is commonly used in a microscope.

Semi-plan achromatic objective: in addition to meeting the requirements of achromatic objective, the curvature of field and astigmatism of the objective should also be properly corrected.
Plan achromatic objective: in addition to meeting the requirements of achromatic objectives, the curvature of field and astigmatism of the objective should also be well corrected. The plan objective provides a very good correction of the image plane curvature in the field of view of the objective, making the entire field of view smooth and easy to observe, especially in measurement it has achieved a more accurate effect.

Plan semi-apochromatic objective: in addition to meeting the requirements of plan achromatic objective, it is necessary to well correct the secondary spectrum of the objective (the axial chromatic aberration of the C line and the F line).
Plan apochromatic objective: in addition to meeting the requirements of plan achromatic objective, it is necessary to very well correct the tertiary spectrum of the objective (the axial chromatic aberration of the C line, the D line and the F line) and spherochromatic aberration. The apochromatic aberration has corrected the chromatic aberration in the range of red, green and purple (basically the entire visible light), and there is basically no limitation on the imaging effect of the light source. Generally, the apochromatic aberration is used in a high magnification objective.

Objective Working DistanceClose Λ

The objective working distance is the vertical distance from the foremost surface end of the objective of the microscope to the object surface to be observed.
Generally, the greater the magnification, the higher the resolution of the objective, and the smaller the working distance, the smaller the field of view. Conversely, the smaller the magnification, the lower the resolution of the objective, and the greater the working distance, and greater the field of view.
High-magnification objectives (such as 80X and 100X objectives) have a very short working distance. Be very careful when focusing for observation. Generally, it is after the objective is in position, the axial limit protection is locked, then the objective is moved away from the direction of the observed object.
The relatively greater working distance leaves a relatively large space between the objective and the object to be observed. It is suitable for under microscope operation, and it is also easier to use more illumination methods. The defect is that it may reduce the numerical aperture of the objective, thereby reducing the resolution.

Boom StandClose Λ

Boom stand is also called universal stand.
It is a relatively large pole type stand. The height and length of the stand are big, and it can be freely adjusted in height, length and various angles. Its large weight ensures stable support and occupation of large space, but it can make the microscope free to move in a wide range with convenience. Boom stand is suitable for observing large objects.
The direction of boom stand is flexible, and when in use, various kinds of positions and methods can be adopted, such as front, side, and tilt etc., to facilitate the layout of the workbench. On the side of the crossbar of the boom stand, a 5/8-inch connecting hole is generally left for connecting various focusing mechanisms and microscopes.
The base of the boom stand usually only plays a fixing and supporting role. Under the observation of the microscope, it is an empty workbench, which can be used to place various platforms, work operating surfaces, and tools, etc., and can be freely combined into different working positions. When the base is large, the object to be observed can also be placed.
In industrial places, most of the working positions are fixed. Sometimes, in one working position, a lot of tools, equipment and instruments need to be placed.. Because the microscope is relatively large in size and takes up also a relatively bigger space, and not convenient to move back and forth, therefore for purpose of use, the boom stand can be placed in an appropriate position, and does not need to occupy the most commonly used work tables. When in use, the microscope can be moved over, and pushed to the side when not in use. This is very suitable for use in electronics factories, installation and maintenance, medical and animal anatomy, archaeology and other industries.

Boom stand generally does not have a fixed focusing device, and you can choose a variety of flexible accessories.
Because the stand needs to ensure flexibility, therefore there are many locking buttons in all directions. In any time after adjustment, it must be ensured that each knob is in a locked state to avoid sliding, tilting and flipping of the microscope, thereby damaging the microscope and the items on the workbench.

360° Degree RotatableClose Λ

The eyepiece of the microscope can have different viewing or observing directions. When the position of the microscope is uncomfortable, the direction of the eyepiece tube of the microscope can be adjusted, to facilitate observation and operation.

Placement method of different viewing angles of the microscope:
General direction: the support column is behind the object to be observed
Reverse direction: the support column is in front of the object to be observed
Lateral direction: the support column is on the side of the object to be observed
Rotating eyepiece tube, different microscopes may have different methods, for some, the direction is confirmed when installing the eyepiece tube of the microscope, for some, by rotating the body of the microscope, and for some, by rotating the support member on the support or holder of the microscope.

E-ArmClose Λ

Usually the universal joint is called E-Arm, i.e., Easy-Arm, also known as Universal Arm. Many people in the industry call it Bonder Arm, which refers to the components that connect the microscope on the COG Bonding Machine.
At the tail of the E-arm there is a standard 5/8 inch (0.625 inch, 15.875mm) connector. The connector can be moved freely in both horizontal and vertical directions, and can also be fixed at an angular position in the vertical direction to facilitate microscope observation from different angles.
E-arm can be connected to various kinds of microscope stands with 5/8-inch adapters, such as boom stand, flexible arm etc. It is also possible to connect various kinds of microscopes by adding or replacing different adapters. Note that, in general, these stands themselves are not directly configured with this E-arm, and separate purchase is necessary.

Dia. 76mm Scope HolderClose Λ

The 76mm stand scope holder is the most popular microscope body adapter size, suitable for stereo microscopes produced by most manufacturers.

Place the microscope body in a 76mm scope holder, tighten with screws to avoid shaking when the microscope is in use.
Because this stand scope holder is very common, some special-sized microscopes can also borrow and use this stand, but only need a specific adapter to connect the microscope body with a diameter of less than 76mm.

PackagingClose Λ

After unpacking, carefully inspect the various random accessories and parts in the package to avoid omissions. In order to save space and ensure safety of components, some components will be placed outside the inner packaging box, so be careful of their inspection.
For special packaging, it is generally after opening the box, all packaging boxes, protective foam, plastic bags should be kept for a period of time. If there is a problem during the return period, you can return or exchange the original. After the return period (usually 10-30 days, according to the manufacturer’s Instruction of Terms of Service), these packaging boxes may be disposed of if there is no problem.

Optical Data

Video Microscope Optical Data Sheet
P/N	Objective	Coupler
		MV02011121 (0.5X)
		Magnification
MZ02014211	0.5X	0.18-1.12X
MZ02014311	0.75X	0.26-1.69X
MZ02014411	1X	0.35-2.25X
MZ02014511	1.5X	0.52-3.38X
MZ02014611	2X	0.7-4.5X
1. Magnification=Objective Optical Magnification * Body Magnification * Coupler Magnification

Camera Image Sensor Specifications
No.	Camera Image Sensor Size	Camera image Sensor Diagonal
No.	Camera Image Sensor Size	（mm）	（inch）
1	1/4 in.	4mm	0.157"
2	1/3 in.	6mm	0.236"
3	1/2.8 in.	6.592mm	0.260"
4	1/2.86 in.	6.592mm	0.260"
5	1/2.7 in.	6.718mm	0.264"
6	1/2.5 in.	7.182mm	0.283"
7	1/2.3 in.	7.7mm	0.303"
8	1/2.33 in.	7.7mm	0.303"
9	1/2 in.	8mm	0.315"
10	1/1.9 in.	8.933mm	0.352"
11	1/1.8 in.	8.933mm	0.352"
12	1/1.7 in.	9.5mm	0.374"
13	2/3 in.	11mm	0.433"
14	1/1.2 in.	12.778mm	0.503"
15	1 in.	16mm	0.629"
16	1/1.1 in.	17.475mm	0.688"

Digital Magnification Data Sheet
Image Sensor Size	Image Sensor Diagonal size	Monitor
		Screen Size (10in)
		Digital Zoom Function
1/3 in.	6mm	42.3
1. Digital Zoom Function= (Screen Size * 25.4) / Image Sensor Diagonal size

Microscope Optical and Digital Magnifications Data Sheet
Objective		Coupler		Camera		Monitor	Video Microscope Optical Magnifications	Digital Zoom Function	Total Magnification	Field of View (mm)
PN	Magnification	PN	Magnification	Image Sensor Size	Image Sensor Diagonal size	Screen Size	Video Microscope Optical Magnifications	Digital Zoom Function	Total Magnification	Field of View (mm)
MZ02014211	0.5X	MV02011121	0.5X	1/3 in.	6mm	10in	0.18-1.12X	42.3	7.61-47.38X	5.36-33.33mm
MZ02014311	0.75X	MV02011121	0.5X	1/3 in.	6mm	10in	0.26-1.69X	42.3	11-71.49X	3.55-23.08mm
MZ02014411	1X	MV02011121	0.5X	1/3 in.	6mm	10in	0.35-2.25X	42.3	14.8-95.18X	2.67-17.14mm
MZ02014511	1.5X	MV02011121	0.5X	1/3 in.	6mm	10in	0.52-3.38X	42.3	22-142.97X	1.78-11.54mm
MZ02014611	2X	MV02011121	0.5X	1/3 in.	6mm	10in	0.7-4.5X	42.3	29.61-190.35X	1.33-8.57mm
1. Video Microscope Optical Magnifications=Objective Optical Magnification * Body Magnification * Coupler Magnification
2. Digital Zoom Function= (Screen Size * 25.4) / Image Sensor Diagonal size
3. Total Magnification= Video Microscope Optical Magnifications * (Screen Size * 25.4) / Image Sensor Diagonal size
4. Field of View (mm)= Image Sensor Diagonal size / Video Microscope Optical Magnifications

Contains

Parts Including

Picture	P/N	Product Name
	MV02011121	10" Video Microscope Body
	ST02051101	Boom Stand
	SA02021102	76mm E-Arm

Desiccant Bag

2 Bags

Allen Key

M10 1pc M4 1pc M2 1pc

Product Instructions/Operation Manual

1pc

Packing
Packaging Type	Carton Packaging
Packaging Material	Corrugated Carton
Packaging Dimensions(1)	51x43x18cm (20x17x7″)
Packaging Dimensions(2)	29x16x18cm (11.417x6.299x7.087″)
Packaging Dimensions(3)	32x28x24.5cm (12.598x11.024x9.646″)
Inner Packing Material	Plastic Bag
Ancillary Packaging Materials	Styrofoam
Gross Weight	25.24kg (55.64lbs)
Minimum Packaging Quantity	1pc
Transportation Carton	Carton Packaging
Transportation Carton Material	Corrugated Carton
Transportation Carton Dimensions(1)	51x43x18cm (20x17x7″)
Transportation Carton Dimensions(2)	29x16x18cm (11.417x6.299x7.087″)
Transportation Carton Dimensions(3)	32x28x24.5cm (12.598x11.024x9.646″)
Total Gross Weight of Transportation(kilogram)	25.24
Total Gross Weight of Transportation(pound)	55.64
Quantity of One Transportation Carton	3pc