Microscope Post Stand, Bottom LED Light Base (Dimmable)

In Stock

Log in for pricing

Write a Review
SKU:
ST05021203
Condition:
New
Warranty:
1 Year
  • Microscope Post Stand, Bottom LED Light Base (Dimmable)
  • Microscope Post Stand, Bottom LED Light Base (Dimmable)
  • Microscope Post Stand, Bottom LED Light Base (Dimmable)
  • Microscope Post Stand, Bottom LED Light Base (Dimmable)
  • Microscope Post Stand, Bottom LED Light Base (Dimmable)
  • Microscope Post Stand, Bottom LED Light Base (Dimmable)
  • Microscope Post Stand, Bottom LED Light Base (Dimmable)
  • Microscope Post Stand, Bottom LED Light Base (Dimmable)
  • Microscope Post Stand, Bottom LED Light Base (Dimmable)
  • Microscope Post Stand, Bottom LED Light Base (Dimmable)
  • Microscope Post Stand, Bottom LED Light Base (Dimmable)
  • Microscope Post Stand, Bottom LED Light Base (Dimmable)


Quick Overview
Post Stand. Vertical Post Height: 220mm. Vertical Post Diameter: Dia. 32mm. Base Dimensions: 356x240x55mm. Illumination Type: LED Transmitted Light. Input Voltage: AC 100-240V 50/60Hz. Power Cord Connector Type: USA 3 Pins.

ST05021203 LED Illuminated Post Stand
Post Stand
Stand TypePost Stand
Vertical Post Height220mm
Vertical Post Diameter Dia. 32mm
Base TypeIllumination Base
Base ShapeFan-Shape
Base Dimensions356x240x55mm
Illumination TypeLED Transmitted Light
Bottom Illumination TypeLED
Bulb Color Temperature3000-5600K
Input VoltageAC 100-240V 50/60Hz
Power Cord Connector TypeUSA 3 Pins
Power Cable Length1.8m
Surface TreatmentSpray Paint
MaterialMetal
ColorWhite
Net Weight2.80kg (6.17lbs)
Dimensions356x240x300mm (14.016x9.449x11.811 in. )

 


Technical Info

Instructions
Microscope StandClose Λ
Microscope stand have many options depending on the needs, especially stereo microscope stand, there are several factors to consider before choosing:
Stability: microscope stand is used to prop up the microscope body. The stand should be selected according to the size of the microscope mainframe. The stability of the stand determines the stability of the microscope in use, and its various adapters and screws must be tightly locked.
Volume size: limited by the working environment and space of the workbench.
Workspace and scope: the size of the workspace of the object being observed and the height of the object being observed should be considered.
Choice of lighting: some stands are equipped with a light source, but some are not, depending on whether there are conditions to add additional lighting.

Operational requirements:
1. Install the stand as required.
2. Arrange a reasonable fixed position for the stand.
3. Carefully tighten the microscope mainframe.
4. Arrange the location of the additional light source reasonably, and place the electric wire in a position that does not interfere with the work.
5. Connect the various kinds of peripheral devices, such as cameras, monitors, computers and so on.
Post StandClose Λ
Post stand generally has relatively tall post. When the focus is adjusted, the focusing mechanism can slide up and down the post, the microscope is thus placed in an approximately focused position, and then the focusing mechanism makes fine and accurate adjustment. This kind of stand can move quickly, and is suitable for viewing objects with a higher height and bigger volume.
After the microscope is mounted, the microscope imaging center needs to be aligned with the center of the platen.
The focusing mechanism button on the post must be tightened to lock the guard ring device, and the microscope should be prevented from loosening and shaking when working. When it is necessary to adjust the height, hold the microscope and the focusing mechanism with one hand, then release the knob, adjust it to the proper position, lock the knob, then top the guard ring to the lower position of the focusing mechanism, and lock it tight. In particular, avoid accidental dropping of the microscope due to gravity, thereby damaging the microscope and the objects below.
Illumination BaseClose Λ
Illumination base is a modular light source component, suitable for microscope stand base that has no light source of itself, and it is usually dedicated components supporting some stands.
Illumination base typically includes at least one bottom lighting, and there are also illumination base that includes the circuit portion of the upper light source.
PackagingClose Λ
After unpacking, carefully inspect the various random accessories and parts in the package to avoid omissions. In order to save space and ensure safety of components, some components will be placed outside the inner packaging box, so be careful of their inspection.
For special packaging, it is generally after opening the box, all packaging boxes, protective foam, plastic bags should be kept for a period of time. If there is a problem during the return period, you can return or exchange the original. After the return period (usually 10-30 days, according to the manufacturer’s Instruction of Terms of Service), these packaging boxes may be disposed of if there is no problem.
Packing  
Packaging TypeCarton Packaging
Packaging MaterialCorrugated Carton
Packaging Dimensions(1)44x35.6x39cm (17.323x14.016x15.354″)
Inner Packing MaterialPlastic Bag
Ancillary Packaging MaterialsExpanded Polystyrene
Gross Weight4.50kg (9.92lbs)
Minimum Packaging Quantity1pc
Transportation CartonCarton Packaging
Transportation Carton MaterialCorrugated Carton
Transportation Carton Dimensions(1)44x35.6x39cm (17.323x14.016x15.354″)
Total Gross Weight of Transportation(kilogram)4.50
Total Gross Weight of Transportation(pound)9.92
Quantity of One Transportation Carton1pc

Related Products