- High-resolution imaging with a 12MP camera for coins, soldering, education, and more.
- Built-in LCD Display allows for direct viewing without eye strain.
- Adjustable LED lighting with rechargable battery allows for on the go exploration.
- Adjustable and stable stand allows you to adjust the height and angle to suit your needs perfectly.
- Take photos and videos and save them to a MicroSD HC card to share your findings!
Discover the Ultimate LCD Digital Microscope for Coins and Soldering
Are you searching for a top-notch, versatile microscope perfect for your coin collection or soldering projects? Look no further than our advanced LCD Digital Microscope!
Crystal Clear Viewing Experience
Featuring a built-in LCD display, this digital microscope allows you to observe images directly without any strain on your eyes or neck.
High-Resolution Imaging
With a powerful 12-megapixel camera, capture stunning photos and videos of your specimens. Enjoy an impressive magnification range from 1x to 1200x, ensuring you can see every intricate detail with clarity.
Adjustable LED Illumination
Adapt to various lighting conditions with ease thanks to the adjustable LED lights. Illuminate your specimens perfectly for optimal viewing.
Stability and Flexibility
Ideal for coin inspection and soldering, our microscope comes with a sturdy metal stand. Adjust the height and angle to your preference, and explore fine details without any distortion.
Ample Storage and Easy Sharing
Supports a 128GB MicroSD HC card (not included). Take photos and videos on the microscope and effortlessly transfer your findings via the MicroSD HC Card to your computer to share them online.
Portable with Long-Lasting Battery Life
Powered by a rechargeable battery, enjoy hours of continuous use without interruption. This allows the microscope to be taken on the go or used outside.
Perfect for All Users
Whether you're a hobbyist, collector, student, or professional, this LCD Digital Microscope offers unparalleled ease and convenience. It's simple to set up, use, and maintain.
Special Notes:
The microscope when adjusted to the tallest stand setting has a 6X magnification. To achieve 1X magnification, increase the working distance underneath the microscope.
For example, to see the whole coin on the screen:
1. Place the microscope on a platform. Example: Use the box the microscope came in.
2. Loose then tightening screw. Swivel track post over the specimen and tighten the screw.
3. Place a counter weight on the stand. Example: use a soda can (12 fl oz minimum), or something about 1 lb in weight.
Order your LCD Digital Microscope today and unlock the wonders of the microscopic world with unmatched precision and convenience!
Instruction Manual
DM02050111_Digital_Microscope__Instruction_Manual.doc
Quick Overview
Finite. Total Magnification: 1-1200X. Track Stand. Illumination Type: LED Reflection Light. 12 Megapixels. Screen Size: 7in. Input Voltage: AC 100-240V 50/60Hz. System Magnification:6X-1200X.
Suggested Applications
Collecting , Coin & Stamp
DM02050111 Digital Microscope
Optical System Specifications
| Optical System | Finite |
| Total Magnification | 1-1200X |
| System Working Distance | 10mm-∞ |
Track Stand
| Stand Type | Track Stand |
| Holder Adapter Type | Dia. 35mm Scope Holder |
| Track Length | 135mm |
| Base Type | Table Base |
| Base Shape | Rectangle |
| Stand Throat Depth | 62.5mm |
| Base Dimensions | 165x120x5mm |
| Inclination on Vertical Direction | 0-45° |
| Focus Mode | Manual |
| Focus Distance | 115mm |
| Coarse Focus Distance per Rotation | 19mm |
Microscope Illumination System
| Illumination Type | LED Reflection Light |
LCD Display Digital Camera
| Camera Maximum Pixels | 12 Megapixels |
| Camera Resolution | 4032x3024 |
| Transmission Frame Rate | 30fps |
| Exposure Control | Manual |
| Image Capture Output Format | JPEG |
| Video Output Format | MOV |
| Language | English/French/Spanish/German/Italian/Simplified Chinese/Traditional Chinese/Japanese/Korean/Russian/Thai/Hebrew/Portuguese/Turkish/Czech/Polish |
| Max. Supported Memory Card | 128G |
| Screen Size | 7in |
| Screen Aspect Ratio | 16:9 |
Power Supply
| Input Voltage | AC 100-240V 50/60Hz |
| Output Voltage | DC 5V |
| Power Cord Connector Type | USA 2 Pins |
| Power Cable Length | 0.7m |
Other Parameters
| Material | Plastic |
| Color | Black |
| Net Weight | 0.86kg (1.90lbs) |
| Notes | System Magnification:6X-1200X |
Series
| DM0205 | DM02050111 |
Technical Info
Instructions
Digital MicroscopeClose Λ
| Digital microscope is the general term for microscope that can convert an optical image into a digital image, and usually does not specifically refer to a certain type of microscope. It should be noted however that most microscopes can be mounted with cameras and display devices to change to digital microscope. Microscopes in the visible range, from the digital imaging point of view, all use CCD or CMOS sensors to image the optical signal as an electric signal on a computer or display. However, the difference between various kinds of digital microscopes mainly comes from the optical microscope itself, so it is necessary to look at the imaging effect and function of the optical part in order to select the type of digital microscope. From the classification point of view, digital microscopes can be divided into: digital biological microscopes, digital stereo microscopes, etc. It should be noted that due to the variety of lenses, ordinary lenses or microscopes, if mounted with a digital camera, can all become a digital microscope. At present, the trend of digital microscopes is not only to present simple digital images, but to collect, process and analyze images through back-end software, especially for image measurement, comparison, judgment, and large-format scanning and splicing, and three-dimensional synthesis and so on, these aspects have been widely developed and applied. |
FiniteClose Λ
| Microscopes and components have two types of optical path design structures. One type is finite optical structural design, in which light passing through the objective lens is directed at the intermediate image plane (located in the front focal plane of the eyepiece) and converges at that point. The finite structure is an integrated design, with a compact structure, and it is a kind of economical microscope. Another type is infinite optical structural design, in which the light between the tube lens after passing the objective lens becomes "parallel light". Within this distance, various kinds of optical components necessary such as beam splitters or optical filters call be added, and at the same time, this kind of design has better imaging results. As the design is modular, it is also called modular microscope. The modular structure facilitates the addition of different imaging and lighting accessories in the middle of the system as required. The main components of infinite and finite, especially objective lens, are usually not interchangeable for use, and even if they can be imaged, the image quality will also have some defects. The separative two-objective lens structure of the dual-light path of stereo microscope (SZ/FS microscope) is also known as Greenough. Parallel optical microscope uses a parallel structure (PZ microscope), which is different from the separative two-object lens structure, and because its objective lens is one and the same, it is therefore also known as the CMO common main objective. |
Total MagnificationClose Λ
| Total magnification is the magnification of the observed object finally obtained by the instrument. This magnification is often the product of the optical magnification and the electronic magnification. When it is only optically magnified, the total magnification will be the optical magnification. Total magnification = optical magnification X electronic magnification Total magnification = (objective X photo eyepiece) X (display size / camera sensor target ) |
System Working DistanceClose Λ
| Working distance, also referred to as WD, is usually the vertical distance from the foremost surface end of the objective lens of the microscope to the surface of the observed object. When the working distance or WD is large, the space between the objective lens and the object to be observed is also large, which can facilitate operation and the use of corresponding lighting conditions. In general, system working distance is the working distance of the objective lens. When some other equipment, such as a light source etc., is used below the objective lens, the working distance (i.e., space) will become smaller. Working distance or WD is related to the design of the working distance of the objective lens. Generally speaking, the bigger the magnification of the objective lens, the smaller the working distance. Conversely, the smaller the magnification of the objective lens, the greater the working distance. When it is necessary to change the working distance requirement, it can be realized by changing the magnification of the objective lens. |
Track StandClose Λ
| Throughout the focusing range, the track stand moves up and down along the guide rail through the focusing mechanism to achieve the purpose of focusing the microscope. This kind of structure is relatively stable, and the microscope is always kept moving up and down vertically along a central axis. When the focus is adjusted, it is not easy to shake, and there is no free sliding phenomenon. It is a relatively common and safe and reliable accessory. The size of the stand is generally small, flexible and convenient, and most of them are placed on the table for use, Therefore, together with the post stand, it is also called “desktop or table top stand". With regard to the height of the stand, most manufacturers usually do not make it very high. If the guide rail is long, it is easy to deform, and relatively more difficult . |
Stand Throat DepthClose Λ
| Stand throat depth, also known as the throat depth, is an important parameter when selecting a microscope stand. When observing a relatively large object, a relatively large space is required, and a large throat depth can accommodate the object to move to the microscope observation center. |
Inclination on Vertical DirectionClose Λ
| Conventional microscopic observation is to observe the observed object from top to bottom at a vertical angle of 90 degrees. Inclination on vertical direction observation is to observe from an angle of inclination direction based on the needs of the object to be observed, so as to see more suitable feature points of the observed object. Inclination observation often has ergonomic requirements that allow the observer to adjust the angle at will, and using the microscope in a more comfortable position and sitting posture can help reduce fatigue. In general, all inclination observations are to use microscope with low magnification, which requires a larger field of view and depth of field, otherwise the focusing will be more difficult. |
LCD Display Digital CameraClose Λ
| LCD display digital camera is a combination of a digital camera and a display. |
Camera Maximum PixelsClose Λ
| The pixel is determined by the number of photosensitive elements on the photoelectric sensor of the camera, and one photosensitive element corresponds to one pixel. Therefore, the more photosensitive elements, the larger the number of pixels; the better the imaging quality of the camera, and the higher the corresponding cost. The pixel unit is one, for example, 1.3 million pixels means 1.3 million pixels points, expressed as 1.3MP (Megapixels). |
Camera ResolutionClose Λ
| Resolution of the camera refers to the number of pixels accommodated within unit area of the image sensor of the camera. Image resolution is not represented by area, but by the number of pixels accommodated within the unit length of the rectangular side. The unit of length is generally represented by inch. |
 |
Transmission Frame RateClose Λ
| Frame rate is the number of output of frames per second, FPS or Hertz for short. The number of frames per second (fps) or frame rate represents the number of times the graphics process is updated per second. Due to the physiological structure of the human eye, when the frame rate of the picture is higher than 16fps, it is considered to be coherent, and high frame rate can make the image frame more smooth and realistic. Some industrial inspection camera applications also require a much higher frame rate to meet certain specific needs. The higher the resolution of the camera, the lower the frame rate. Therefore, this should be taken into consideration during their selection. When needing to take static or still images, you often need a large resolution. When needing to operate under the microscope, or shooting dynamic images, frame rate should be first considered. In order to solve this problem, the general industrial camera design is to display the maximum frame rate and relatively smaller resolution when viewing; when shooting, the maximum resolution should be used; and some cameras need to set in advance different shooting resolutions when taking pictures, so as to achieve the best results. |
PackagingClose Λ
| After unpacking, carefully inspect the various random accessories and parts in the package to avoid omissions. In order to save space and ensure safety of components, some components will be placed outside the inner packaging box, so be careful of their inspection. For special packaging, it is generally after opening the box, all packaging boxes, protective foam, plastic bags should be kept for a period of time. If there is a problem during the return period, you can return or exchange the original. After the return period (usually 10-30 days, according to the manufacturer’s Instruction of Terms of Service), these packaging boxes may be disposed of if there is no problem. |
| Packing | |
| Packaging Type | Carton Packaging |
| Packaging Material | Corrugated Carton |
| Packaging Dimensions(1) | 24.5x20.5x8cm (9.646x8.071x3.150″) |
| Ancillary Packaging Materials | Plastic |
| Gross Weight | 1.10kg (2.43lbs) |
| Minimum Packaging Quantity | 1pc |
| Transportation Carton | Carton Packaging |
| Transportation Carton Material | Corrugated Carton |
| Transportation Carton Dimensions(1) | 24.5x20.5x8cm (9.646x8.071x3.150″) |
| Total Gross Weight of Transportation(kilogram) | 1.10 |
| Total Gross Weight of Transportation(pound) | 2.43 |
 |
