Microscope Flexible Articulating Arm, Wall Mount, 76mm Focus Rack

In Stock

Log in for pricing

Write a Review
SKU:
ST02071224
Condition:
New
Warranty:
1 Year
  • Microscope Flexible Articulating Arm, Wall Mount, 76mm Focus Rack
  • Microscope Flexible Articulating Arm, Wall Mount, 76mm Focus Rack
  • Microscope Flexible Articulating Arm, Wall Mount, 76mm Focus Rack
  • Microscope Flexible Articulating Arm, Wall Mount, 76mm Focus Rack
  • Microscope Flexible Articulating Arm, Wall Mount, 76mm Focus Rack
  • Microscope Flexible Articulating Arm, Wall Mount, 76mm Focus Rack
  • Microscope Flexible Articulating Arm, Wall Mount, 76mm Focus Rack
  • Microscope Flexible Articulating Arm, Wall Mount, 76mm Focus Rack
Instruction Manual
ST020712 Flexible Arm Instruction Manual-English.doc

Quick Overview
Flexible Arm. Dia. 76mm Scope Holder. Total Arm Length: 800mm. Mounting Hole on the Top of Horizontal Arm: 5/8 in. End Adapter. Focus Distance: 50mm . E-Arm Mounting Adapter: 5/8 in. End Adapter. Mount Adapter Size of Stand: Dia. 22.2mm. Fixing Adapter Size of Base: M11 Pitch 110x110mm. With Safety protection against falling Screw.

ST02071224 Flexible Arm, Wall Mount, 76mm E-Arm
Flexible Arm
Flexible Arm (No Base)
Stand TypeFlexible Arm
Total Arm Length800mm
Mounting Hole on the Top of Horizontal Arm5/8 in. End Adapter
Horizontal Rotation Angle360° Degree Rotatable
Horizontal Arm Maximum Load9.50kg (20.94lbs)
Horizontal Arm Travel Mode on Horizontal DirectionManual
Horizontal Arm Travel Mode on Z DirectionManual
Base Mounting Size Dia. 22mm
Surface TreatmentSpray Paint
MaterialMetal
ColorBlack
Net Weight5.00kg (11.023lbs)
Dimensions104x450x320mm (4.095x17.717x12.598 in. )
E-Arm
76mm E-Arm
Holder Adapter Type Dia. 76mm Scope Holder
Focus Distance50mm
Coarse Focus Distance per Rotation20mm
E-Arm Rotation Range on Horizontal Direction360°
E-Arm Rotation Range on Z Direction180°
E-Arm Mounting Adapter5/8 in. End Adapter
Center Distance from E-Arm Adapter to Scope Holder130mm
E-Arm Horizontal Adjustment ScrewHorizontal Adjustable
Safety Protection Against Falling ScrewWith Safety protection against falling Screw
Surface TreatmentSpray Paint
MaterialMetal
ColorWhite
Net Weight0.84kg (1.85lbs)
Wall Mount Adapter
Wall Mount for Flexible Arm
Mount Adapter Size of Stand Dia. 22.2mm
Fixing Adapter Size of BaseM11 Pitch 110x110mm
Surface TreatmentElectroplating Black
MaterialMetal
ColorBlack
Net Weight1.03kg (2.27lbs)

 


Technical Info

Instructions
Microscope StandClose Λ
Microscope stand have many options depending on the needs, especially stereo microscope stand, there are several factors to consider before choosing:
Stability: microscope stand is used to prop up the microscope body. The stand should be selected according to the size of the microscope mainframe. The stability of the stand determines the stability of the microscope in use, and its various adapters and screws must be tightly locked.
Volume size: limited by the working environment and space of the workbench.
Workspace and scope: the size of the workspace of the object being observed and the height of the object being observed should be considered.
Choice of lighting: some stands are equipped with a light source, but some are not, depending on whether there are conditions to add additional lighting.

Operational requirements:
1. Install the stand as required.
2. Arrange a reasonable fixed position for the stand.
3. Carefully tighten the microscope mainframe.
4. Arrange the location of the additional light source reasonably, and place the electric wire in a position that does not interfere with the work.
5. Connect the various kinds of peripheral devices, such as cameras, monitors, computers and so on.
Flexible ArmClose Λ
Flexible arm is an arm or stand that imitates the human arm. It is a combination of several mechanical arm joints to complete the horizontal and vertical movement and freely adjust the focus position of the microscope. Flexible arm allows the microscope to move flexibly and freely over a wide range, and is also suitable for viewing larger objects.
The fixing method of the arm is usually optional, with strong interchangeability. Below the observation of the microscope there is an empty workbench, which can be used to place various kinds of platforms, work operating tables, tools, etc., and can be freely combined into different working positions.
In industrial places, most of the working positions are fixed. Sometimes, a lot of tools, equipment and instruments need to be placed in one working position. Because the microscope is relatively large in size and takes up also a relatively bigger space, and not convenient to move back and forth, therefore the flexible arm can be placed in a flexible position, and does not occupy the most commonly used workbench. When in use, the microscope can be moved over, and pushed to the side when not in use. This is very suitable for use in electronics factories, installation and maintenance, medical and animal anatomy, archaeology and other industries.
Flexible arm generally does not have a fixed focusing device, and you can choose a variety of flexible accessories.
When adjusting the height of the flexible arm, you need to use both hands at the same time, with one hand holding the microscope or the forearm of the stand, and the other adjusting the adjusting screw or spring mechanism that looses/tightens the arm. When releasing, pay attention to avoiding sudden sliding down.

Because one needs to ensure the flexibility of the arm or stand, there are many locking buttons in all directions. After the necessary locking buttons are adjusted, it must be ensured that each knob is in locked state to avoid sliding, tilting, and flipping of the microscope, thereby damaging the microscope and the items on the workbench.

Flexible arm has a mechanism of the hydraulic spring for adjusting the pre-tightening tension. When different microscopes weigh differently, these flexible arms can be adjusted to make the microscope more stable.
360° Degree RotatableClose Λ
The eyepiece of the microscope can have different viewing or observing directions. When the position of the microscope is uncomfortable, the direction of the eyepiece tube of the microscope can be adjusted, to facilitate observation and operation.

Placement method of different viewing angles of the microscope:
General direction: the support column is behind the object to be observed
Reverse direction: the support column is in front of the object to be observed
Lateral direction: the support column is on the side of the object to be observed
Rotating eyepiece tube, different microscopes may have different methods, for some, the direction is confirmed when installing the eyepiece tube of the microscope, for some, by rotating the body of the microscope, and for some, by rotating the support member on the support or holder of the microscope.
E-ArmClose Λ
Usually the universal joint is called E-Arm, i.e., Easy-Arm, also known as Universal Arm. Many people in the industry call it Bonder Arm, which refers to the components that connect the microscope on the COG Bonding Machine.
At the tail of the E-arm there is a standard 5/8 inch (0.625 inch, 15.875mm) connector. The connector can be moved freely in both horizontal and vertical directions, and can also be fixed at an angular position in the vertical direction to facilitate microscope observation from different angles.
E-arm can be connected to various kinds of microscope stands with 5/8-inch adapters, such as boom stand, flexible arm etc. It is also possible to connect various kinds of microscopes by adding or replacing different adapters. Note that, in general, these stands themselves are not directly configured with this E-arm, and separate purchase is necessary.
Dia. 76mm Scope HolderClose Λ
The 76mm stand scope holder is the most popular microscope body adapter size, suitable for stereo microscopes produced by most manufacturers.

Place the microscope body in a 76mm scope holder, tighten with screws to avoid shaking when the microscope is in use.
Because this stand scope holder is very common, some special-sized microscopes can also borrow and use this stand, but only need a specific adapter to connect the microscope body with a diameter of less than 76mm.
Wall Mount AdapterClose Λ
When the microscope is needed to be fixed onto the wall, use this wall mount adapter that is fixed onto the wall, especially when it is needed in operating the space for use, such as in hospitals, clinics, etc.
When installing the wall mount adapter, one must first confirm whether the wall is load-bearing, and whether the weight of the stand and the body is bearable.
PackagingClose Λ
After unpacking, carefully inspect the various random accessories and parts in the package to avoid omissions. In order to save space and ensure safety of components, some components will be placed outside the inner packaging box, so be careful of their inspection.
For special packaging, it is generally after opening the box, all packaging boxes, protective foam, plastic bags should be kept for a period of time. If there is a problem during the return period, you can return or exchange the original. After the return period (usually 10-30 days, according to the manufacturer’s Instruction of Terms of Service), these packaging boxes may be disposed of if there is no problem.
Contains  
Parts Including
PictureP/NProduct Name
SA02091301Wall Mount for Flexible Arm
SA0202110276mm E-Arm
ST02071211Flexible Arm (No Base)
Packing  
Packaging TypeCarton Packaging
Packaging MaterialCardboard Box
Packaging Dimensions(1)17x19x8cm (6.693x7.480x3.150″)
Packaging Dimensions(2)50x33x13cm (19.685x12.992x5.118″)
Packaging Dimensions(3)29x16x18cm (11.417x6.299x7.087″)
Inner Packing MaterialPlastic Bag
Ancillary Packaging MaterialsStyrofoam
Gross Weight7.85kg (17.30lbs)
Minimum Packaging Quantity1pc
Transportation CartonCarton Packaging
Transportation Carton MaterialCardboard Box
Transportation Carton Dimensions(1)17x19x8cm (6.693x7.480x3.150″)
Transportation Carton Dimensions(2)50x33x13cm (19.685x12.992x5.118″)
Transportation Carton Dimensions(3)29x16x18cm (11.417x6.299x7.087″)
Total Gross Weight of Transportation(kilogram)7.85
Total Gross Weight of Transportation(pound)17.30
Quantity of One Transportation Carton1pc

Related Products