Focus Distance 50mm Vertical Post Height 295mm 76mm Post Stand ST19011503

Specifications
Packing List
Technical Info

Quick Overview
Post Stand. Dia. 76mm Scope Holder. Vertical Post Height: 295mm. Vertical Post Diameter: Dia. 32mm. Base Dimensions: 320x260x16mm. Focus Distance: 50mm .

ST19011503 76mm Post Stand

Post Stand

Stand Type	Post Stand
Holder Adapter Type	Dia. 76mm Scope Holder
Vertical Post Height	295mm
Vertical Post Diameter	Dia. 32mm
Base Type	Table Base
Base Shape	Rectangle
Base Dimensions	320x260x16mm
Focus Mode	Manual
Focus Distance	50mm
Coarse Focus Distance per Rotation	22mm
Center Distance from Hole to Scope Holder	155mm
Surface Treatment	Plastic Spray Coating
Material	Metal
Color	White
Net Weight	3.25kg (7.17lbs)
Dimensions	320x260x315mm (12.598x10.236x12.402 in. )

Packing
Packaging Type	Carton Packaging
Packaging Material	Corrugated Carton
Packaging Dimensions(1)	48.5x30x20cm (19.094x11.811x7.874″)
Inner Packing Material	Plastic Bag
Ancillary Packaging Materials	Expanded Polystyrene
Gross Weight	4.15kg (9.15lbs)
Minimum Packaging Quantity	1pc
Transportation Carton	Carton Packaging
Transportation Carton Material	Corrugated Carton
Transportation Carton Dimensions(1)	48.5x30x20cm (19.094x11.811x7.874″)
Total Gross Weight of Transportation(kilogram)	4.15
Total Gross Weight of Transportation(pound)	9.15
Quantity of One Transportation Carton	1pc

Technical Info

Instructions

Microscope StandClose Λ

Microscope stand have many options depending on the needs, especially stereo microscope stand, there are several factors to consider before choosing:
Stability: microscope stand is used to prop up the microscope body. The stand should be selected according to the size of the microscope mainframe. The stability of the stand determines the stability of the microscope in use, and its various adapters and screws must be tightly locked.
Volume size: limited by the working environment and space of the workbench.
Workspace and scope: the size of the workspace of the object being observed and the height of the object being observed should be considered.
Choice of lighting: some stands are equipped with a light source, but some are not, depending on whether there are conditions to add additional lighting.

Operational requirements:
1. Install the stand as required.
2. Arrange a reasonable fixed position for the stand.
3. Carefully tighten the microscope mainframe.
4. Arrange the location of the additional light source reasonably, and place the electric wire in a position that does not interfere with the work.
5. Connect the various kinds of peripheral devices, such as cameras, monitors, computers and so on.

Post StandClose Λ

Post stand generally has relatively tall post. When the focus is adjusted, the focusing mechanism can slide up and down the post, the microscope is thus placed in an approximately focused position, and then the focusing mechanism makes fine and accurate adjustment. This kind of stand can move quickly, and is suitable for viewing objects with a higher height and bigger volume.
After the microscope is mounted, the microscope imaging center needs to be aligned with the center of the platen.
The focusing mechanism button on the post must be tightened to lock the guard ring device, and the microscope should be prevented from loosening and shaking when working. When it is necessary to adjust the height, hold the microscope and the focusing mechanism with one hand, then release the knob, adjust it to the proper position, lock the knob, then top the guard ring to the lower position of the focusing mechanism, and lock it tight. In particular, avoid accidental dropping of the microscope due to gravity, thereby damaging the microscope and the objects below.

Dia. 76mm Scope HolderClose Λ

The 76mm stand scope holder is the most popular microscope body adapter size, suitable for stereo microscopes produced by most manufacturers.

Place the microscope body in a 76mm scope holder, tighten with screws to avoid shaking when the microscope is in use.
Because this stand scope holder is very common, some special-sized microscopes can also borrow and use this stand, but only need a specific adapter to connect the microscope body with a diameter of less than 76mm.

PackagingClose Λ

After unpacking, carefully inspect the various random accessories and parts in the package to avoid omissions. In order to save space and ensure safety of components, some components will be placed outside the inner packaging box, so be careful of their inspection.
For special packaging, it is generally after opening the box, all packaging boxes, protective foam, plastic bags should be kept for a period of time. If there is a problem during the return period, you can return or exchange the original. After the return period (usually 10-30 days, according to the manufacturer’s Instruction of Terms of Service), these packaging boxes may be disposed of if there is no problem.