Focus Distance 50mm Horizontal Arm Length 570mm Vertical Post Height 384mm Dual Arm Boom Stand With 76mm E-Arm ST02061103

In Stock

Log in for pricing

Write a Review
SKU:
ST02061103
Condition:
New
  • Focus Distance 50mm Horizontal Arm Length 570mm Vertical Post Height 384mm Dual Arm Boom Stand With 76mm E-Arm ST02061103
  • Focus Distance 50mm Horizontal Arm Length 570mm Vertical Post Height 384mm Dual Arm Boom Stand With 76mm E-Arm ST02061103
  • Focus Distance 50mm Horizontal Arm Length 570mm Vertical Post Height 384mm Dual Arm Boom Stand With 76mm E-Arm ST02061103
  • Focus Distance 50mm Horizontal Arm Length 570mm Vertical Post Height 384mm Dual Arm Boom Stand With 76mm E-Arm ST02061103
  • Focus Distance 50mm Horizontal Arm Length 570mm Vertical Post Height 384mm Dual Arm Boom Stand With 76mm E-Arm ST02061103
  • Focus Distance 50mm Horizontal Arm Length 570mm Vertical Post Height 384mm Dual Arm Boom Stand With 76mm E-Arm ST02061103
  • Focus Distance 50mm Horizontal Arm Length 570mm Vertical Post Height 384mm Dual Arm Boom Stand With 76mm E-Arm ST02061103
  • Focus Distance 50mm Horizontal Arm Length 570mm Vertical Post Height 384mm Dual Arm Boom Stand With 76mm E-Arm ST02061103
  • Focus Distance 50mm Horizontal Arm Length 570mm Vertical Post Height 384mm Dual Arm Boom Stand With 76mm E-Arm ST02061103
  • Focus Distance 50mm Horizontal Arm Length 570mm Vertical Post Height 384mm Dual Arm Boom Stand With 76mm E-Arm ST02061103
  • Focus Distance 50mm Horizontal Arm Length 570mm Vertical Post Height 384mm Dual Arm Boom Stand With 76mm E-Arm ST02061103
  • Focus Distance 50mm Horizontal Arm Length 570mm Vertical Post Height 384mm Dual Arm Boom Stand With 76mm E-Arm ST02061103
  • Focus Distance 50mm Horizontal Arm Length 570mm Vertical Post Height 384mm Dual Arm Boom Stand With 76mm E-Arm ST02061103
  • Focus Distance 50mm Horizontal Arm Length 570mm Vertical Post Height 384mm Dual Arm Boom Stand With 76mm E-Arm ST02061103
  • Focus Distance 50mm Horizontal Arm Length 570mm Vertical Post Height 384mm Dual Arm Boom Stand With 76mm E-Arm ST02061103
  • Focus Distance 50mm Horizontal Arm Length 570mm Vertical Post Height 384mm Dual Arm Boom Stand With 76mm E-Arm ST02061103


Quick Overview
Dual Arm Stand. Dia. 76mm Scope Holder. Vertical Post Height: 384mm. Vertical Post Diameter: Dia. 37.2mm. Horizontal Arm Length: 570mm. Horizontal Diameter: Dia. 20mm. Mounting Hole on the Top of Horizontal Arm: 16mm. Base Dimensions: 285x260x18mm. Focus Distance: 50mm . E-Arm Mounting Adapter: 5/8 in. End Adapter. With Safety protection against falling Screw.

ST02061103 Dual Arm Boom Stand With 76mm E-Arm
Dual Arm Stand
Dual Arm Boom Stand
Stand TypeDual Arm Stand
Vertical Post Height384mm
Maximum Vertical Post Extended Length254mm
Vertical Post Diameter Dia. 37.2mm
Cross Adapter TypeTriple (3) Hole Adapter
Horizontal Arm TypeDouble Bar
Horizontal Arm Length570mm
Horizontal Diameter Dia. 20mm
Mounting Hole on the Top of Horizontal Arm16mm
Horizontal Rotation Angle360° Degree Rotatable
Horizontal Arm Travel Distance on Z-Axis282mm
Horizontal Arm Stretch Range320mm (12.598 in. )
Horizontal Arm Maximum Load9.50kg (20.94lbs)
Horizontal Arm Travel Mode on Horizontal DirectionBall Bearing
Horizontal Arm Travel Mode on Z DirectionManual
Base TypeHeavy Duty Base
Base ShapeRectangle
Base Dimensions285x260x18mm
Surface TreatmentElectroplating Black
MaterialMetal
ColorBlack
Net Weight18.06kg (39.82lbs)
Dimensions570x285x405mm (22.441x11.220x15.945 in. )
E-Arm
76mm E-Arm
Holder Adapter Type Dia. 76mm Scope Holder
Focus Distance50mm
Coarse Focus Distance per Rotation20mm
E-Arm Rotation Range on Horizontal Direction360°
E-Arm Rotation Range on Z Direction180°
E-Arm Mounting Adapter5/8 in. End Adapter
Center Distance from E-Arm Adapter to Scope Holder130mm
E-Arm Horizontal Adjustment ScrewHorizontal Adjustable
Safety Protection Against Falling ScrewWith Safety protection against falling Screw
Surface TreatmentSpray Paint
MaterialMetal
ColorWhite
Net Weight0.84kg (1.85lbs)
Other Parameters
Surface TreatmentSpray Paint
MaterialMetal
ColorBlack, White
Net Weight18.90kg (41.67lbs)

 


Technical Info

Instructions
Microscope StandClose Λ
Microscope stand have many options depending on the needs, especially stereo microscope stand, there are several factors to consider before choosing:
Stability: microscope stand is used to prop up the microscope body. The stand should be selected according to the size of the microscope mainframe. The stability of the stand determines the stability of the microscope in use, and its various adapters and screws must be tightly locked.
Volume size: limited by the working environment and space of the workbench.
Workspace and scope: the size of the workspace of the object being observed and the height of the object being observed should be considered.
Choice of lighting: some stands are equipped with a light source, but some are not, depending on whether there are conditions to add additional lighting.

Operational requirements:
1. Install the stand as required.
2. Arrange a reasonable fixed position for the stand.
3. Carefully tighten the microscope mainframe.
4. Arrange the location of the additional light source reasonably, and place the electric wire in a position that does not interfere with the work.
5. Connect the various kinds of peripheral devices, such as cameras, monitors, computers and so on.
Dual Arm StandClose Λ
Dual arm stand is also called double bar stand, or ball bearing boom stand.
The method of use of dual arm stand and most of its parameters are mostly the same as that of the boom stand. The difference is that the cross arm has two rods, and is held by one set of bearings, so that the two cross arms can be freely pulled and moved, and they are vertical and cannot be tilted left and right, making it more free and stable than the use of the dual arm stand in the horizontal direction. It is especially suitable for users who need to frequently push and pull, observe and adjust the position in horizontal direction.
360° Degree RotatableClose Λ
The eyepiece of the microscope can have different viewing or observing directions. When the position of the microscope is uncomfortable, the direction of the eyepiece tube of the microscope can be adjusted, to facilitate observation and operation.

Placement method of different viewing angles of the microscope:
General direction: the support column is behind the object to be observed
Reverse direction: the support column is in front of the object to be observed
Lateral direction: the support column is on the side of the object to be observed
Rotating eyepiece tube, different microscopes may have different methods, for some, the direction is confirmed when installing the eyepiece tube of the microscope, for some, by rotating the body of the microscope, and for some, by rotating the support member on the support or holder of the microscope.
E-ArmClose Λ
Usually the universal joint is called E-Arm, i.e., Easy-Arm, also known as Universal Arm. Many people in the industry call it Bonder Arm, which refers to the components that connect the microscope on the COG Bonding Machine.
At the tail of the E-arm there is a standard 5/8 inch (0.625 inch, 15.875mm) connector. The connector can be moved freely in both horizontal and vertical directions, and can also be fixed at an angular position in the vertical direction to facilitate microscope observation from different angles.
E-arm can be connected to various kinds of microscope stands with 5/8-inch adapters, such as boom stand, flexible arm etc. It is also possible to connect various kinds of microscopes by adding or replacing different adapters. Note that, in general, these stands themselves are not directly configured with this E-arm, and separate purchase is necessary.
Dia. 76mm Scope HolderClose Λ
The 76mm stand scope holder is the most popular microscope body adapter size, suitable for stereo microscopes produced by most manufacturers.

Place the microscope body in a 76mm scope holder, tighten with screws to avoid shaking when the microscope is in use.
Because this stand scope holder is very common, some special-sized microscopes can also borrow and use this stand, but only need a specific adapter to connect the microscope body with a diameter of less than 76mm.
PackagingClose Λ
After unpacking, carefully inspect the various random accessories and parts in the package to avoid omissions. In order to save space and ensure safety of components, some components will be placed outside the inner packaging box, so be careful of their inspection.
For special packaging, it is generally after opening the box, all packaging boxes, protective foam, plastic bags should be kept for a period of time. If there is a problem during the return period, you can return or exchange the original. After the return period (usually 10-30 days, according to the manufacturer’s Instruction of Terms of Service), these packaging boxes may be disposed of if there is no problem.
Contains  
Parts Including
PictureP/NProduct Name
ST02061101Dual Arm Boom Stand
SA0202110276mm E-Arm
Packing  
Packaging TypeCarton Packaging
Packaging MaterialCorrugated Carton
Packaging Dimensions(1)51x43x18cm (20x17x7″)
Packaging Dimensions(2)29x16x18cm (11.417x6.299x7.087″)
Inner Packing MaterialPlastic Bag
Ancillary Packaging MaterialsStyrofoam
Gross Weight20.65kg (45.53lbs)
Minimum Packaging Quantity1pc
Transportation CartonCarton Packaging
Transportation Carton MaterialCorrugated Carton
Transportation Carton Dimensions(1)51x43x18cm (20x17x7″)
Transportation Carton Dimensions(2)29x16x18cm (11.417x6.299x7.087″)
Total Gross Weight of Transportation(kilogram)20.65
Total Gross Weight of Transportation(pound)45.53
Quantity of One Transportation Carton2pc

Related Products