Quick Overview
Stage Backlight Window Size: Dia. 63mm. Rotary Stage Top Diameter: Dia. 117.5mm. For MS24301211 Manual Stage.
MS24501211 Measurement Rotary Stage
Rotary Stage
| Stage Backlight Window Size | Dia. 63mm |
| Rotary Stage Top Diameter | Dia. 117.5mm |
| Rotary Stage Height | 20mm |
| Rotary Stage Angle Graduate | 360°Graduated in 1° increments |
| Rotary Minimum Angle | 6＇ |
| Surface Treatment | Spray Paint |
| Material | Metal |
| Color | White |
| Net Weight | 1.68kg (3.70lbs) |
| Applied Field | For MS24301211 Manual Stage |
Technical Info
Instructions
Microscope StageClose Λ
| Microscope stage is usually located under the objective lens of the microscope to place the object to be observed. Usually, it is equipped with mechanical motion devices, and is moved and positioned in XYZ three directions or rotates or tilts around the Z axis and other functions. Microscope stage usually has a function of moving in the XY horizontal direction, and is required to be perpendicular to the optical axis of the microscope Z direction in the XY horizontal direction. |
Rotary StageClose Λ
| The rotary stage can be rotated on the horizontal direction around the Z axis of the optical axis of the microscope as its center, and can also change the viewing angle and direction of the object to be observed. Some rotary stage are marked with a 360-degree circumferential scale that can be used to measure angles. If there is no scale on the stage, a reticle can also be mounted on the microscope eyepiece, or an angle plate on the lens tube to measure the angle. Before the rotating stage is used, the co-axis (having a common axis) of the rotating center and the main optical axis of the microscope needs to be adjusted. In works of area measurement, polarization and phase difference observation, especially when the rotating stage with 360 degree scale reading is used, it is all the more necessary to align the center point with the position of the optical axis. To adjust the co-axis, it is usually by using a centering eyepiece with a crosshair in the center, place a specimen with obvious featured points of details on the center position of the rotating stage, while rotating the stage, adjust the position of the stage center screw such that the center position of the specimen is always maintained at the center of the field of view of the stage. Method of rotating stage to measure the angle: 1. First, put the object to be measured at the center of the stage, then adjust the focal length of the objective to get a clear image. 2. Take an eyepiece with a cross reticle, select an X or Y axis from the crosshair in the cross reticle eyepiece, align the starting point of the angle of the object to be measured, and record the position number of the scale on the stage. 3. Rotate the stage or the reticle eyepiece, then align the other edge of the object to the same axis of the cross reticle (the same axis as the X or Y axis just selected), and record the scale number. 4. The difference between the two angle values will be the angle value of the measured object. Repeat the above measurements several times to get a more accurate value. |
Stage Backlight Window SizeClose Λ
| Stage backlight window size refers to the size of the window through which the transmitted light passes under the stage on the XY table plane of the stage. This window is usually covered with a piece of glass. For some stages with accuracy requirements in the XY horizontal direction, the horizontal plane of the glass can be adjusted by the height of the screws on the four corners below, and the consistency with the height of the stage plane is guaranteed. |
PackagingClose Λ
| After unpacking, carefully inspect the various random accessories and parts in the package to avoid omissions. In order to save space and ensure safety of components, some components will be placed outside the inner packaging box, so be careful of their inspection. For special packaging, it is generally after opening the box, all packaging boxes, protective foam, plastic bags should be kept for a period of time. If there is a problem during the return period, you can return or exchange the original. After the return period (usually 10-30 days, according to the manufacturer’s Instruction of Terms of Service), these packaging boxes may be disposed of if there is no problem. |
| Packing | |
| Packaging Type | Carton Packaging |
| Packaging Material | Corrugated Carton |
| Packaging Dimensions(1) | 21.5x19.5x6.5cm (8.465x7.677x2.560″) |
| Inner Packing Material | Plastic Bag |
| Ancillary Packaging Materials | Expanded Polystyrene |
| Gross Weight | 1.81kg (3.99lbs) |
| Minimum Packaging Quantity | 1pc |
| Transportation Carton | Carton Packaging |
| Transportation Carton Material | Corrugated Carton |
| Transportation Carton Dimensions(1) | 21.5x19.5x6.5cm (9x8x3″) |
| Total Gross Weight of Transportation(kilogram) | 1.81 |
| Total Gross Weight of Transportation(pound) | 3.99 |
