300x450x13mm Track Length 325mm Focus Distance 200mm 76mm Track Stand ST02031112

In Stock

Log in for pricing

Write a Review
SKU:
ST02031112
Condition:
New
  • 300x450x13mm Track Length 325mm Focus Distance 200mm 76mm Track Stand ST02031112


Quick Overview
Track Stand. Dia. 76mm Scope Holder. Track Length: 325mm. Focus Distance: 200mm. Fixing Adapter Size of Base: M6 Pitch100x50mm. Platform Dimensions: 300x450x13mm. Platform Pitch: 25x25mm. Platform Screw Standard: M6. For ST0203, ST0204 Series Track Stand.

ST02031112 76mm Track Stand
Track Stand
Stand TypeTrack Stand
Holder Adapter Type Dia. 76mm Scope Holder
Track Length325mm
Base TypeHoneycomb Optical Table
Base ShapeRectangle
Stand Throat Depth121mm
Focus ModeManual
Focus Distance200mm
Coarse Focus Distance per Rotation23mm
Focusing Knob Tightness AdjustableTightness Adjustable
Platform Dimensions300x450x13mm
Platform Pitch25x25mm
Platform Screw StandardM6
Surface TreatmentSpray Paint
MaterialMetal
ColorBlack
Net Weight9.35kg (20.61lbs)
Honeycomb Optical Table Adapter
Track Stand Adapter for Optical Breadboard
Fixing Adapter Size of BaseM6 Pitch100x50mm
Surface TreatmentElectroplating Black
MaterialMetal
ColorBlack
Applied FieldFor ST0203, ST0204 Series Track Stand

 


Technical Info

Instructions
Microscope StandClose Λ
Microscope stand have many options depending on the needs, especially stereo microscope stand, there are several factors to consider before choosing:
Stability: microscope stand is used to prop up the microscope body. The stand should be selected according to the size of the microscope mainframe. The stability of the stand determines the stability of the microscope in use, and its various adapters and screws must be tightly locked.
Volume size: limited by the working environment and space of the workbench.
Workspace and scope: the size of the workspace of the object being observed and the height of the object being observed should be considered.
Choice of lighting: some stands are equipped with a light source, but some are not, depending on whether there are conditions to add additional lighting.

Operational requirements:
1. Install the stand as required.
2. Arrange a reasonable fixed position for the stand.
3. Carefully tighten the microscope mainframe.
4. Arrange the location of the additional light source reasonably, and place the electric wire in a position that does not interfere with the work.
5. Connect the various kinds of peripheral devices, such as cameras, monitors, computers and so on.
Track StandClose Λ
Throughout the focusing range, the track stand moves up and down along the guide rail through the focusing mechanism to achieve the purpose of focusing the microscope. This kind of structure is relatively stable, and the microscope is always kept moving up and down vertically along a central axis. When the focus is adjusted, it is not easy to shake, and there is no free sliding phenomenon. It is a relatively common and safe and reliable accessory.
The size of the stand is generally small, flexible and convenient, and most of them are placed on the table for use, Therefore, together with the post stand, it is also called “desktop or table top stand".
With regard to the height of the stand, most manufacturers usually do not make it very high. If the guide rail is long, it is easy to deform, and relatively more difficult .
Dia. 76mm Scope HolderClose Λ
The 76mm stand scope holder is the most popular microscope body adapter size, suitable for stereo microscopes produced by most manufacturers.

Place the microscope body in a 76mm scope holder, tighten with screws to avoid shaking when the microscope is in use.
Because this stand scope holder is very common, some special-sized microscopes can also borrow and use this stand, but only need a specific adapter to connect the microscope body with a diameter of less than 76mm.
Stand Throat DepthClose Λ
Stand throat depth, also known as the throat depth, is an important parameter when selecting a microscope stand. When observing a relatively large object, a relatively large space is required, and a large throat depth can accommodate the object to move to the microscope observation center.
Focusing Knob Tightness AdjustableClose Λ
Different microscope bodies, different human operations, and different requirements for observation and operation, all require adjustment of the pre-tightening force of the stand that support microscope body.
Facing the stand just right, use both hands to reverse the force to adjust the tightness. (face the knob of one side just right, clockwise is to tighten, counterclockwise is to loosen)
In general, after long-time use, the knob will be loose, and adjustment is necessary.
Honeycomb Optical Table AdapterClose Λ
Honeycomb optical table adapter is the adapter that connect the microscope stand and the optical table. At this time, the stand uses the optical table as the base.
Honeycomb optical tables are usually available in two size standards, namely, the metric size standard, and the British system size standard (1X1", or 25X25mm). When selecting the adapter, attention should be paid to the size that adapter to the honeycomb optical table.
PackagingClose Λ
After unpacking, carefully inspect the various random accessories and parts in the package to avoid omissions. In order to save space and ensure safety of components, some components will be placed outside the inner packaging box, so be careful of their inspection.
For special packaging, it is generally after opening the box, all packaging boxes, protective foam, plastic bags should be kept for a period of time. If there is a problem during the return period, you can return or exchange the original. After the return period (usually 10-30 days, according to the manufacturer’s Instruction of Terms of Service), these packaging boxes may be disposed of if there is no problem.
Contains  
Parts Including
PictureP/NProduct Name
SA02121101Track Stand Adapter for Optical Breadboard
Desiccant Bag1 Bag
Allen KeyM4 1pc M2.5 1pc
Product Instructions/Operation Manual1pc
Packing  
Packaging TypeCarton Packaging
Packaging MaterialCorrugated Carton
Packaging Dimensions(1)38x36x19cm (14.961x14.173x7.480″)
Packaging Dimensions(2)46x30.5x25.5cm (18.110x12.008x10.039″)
Packaging Dimensions(3)12.8x10.7x5.6cm (5.039x4.212x2.204″)
Inner Packing MaterialPlastic Bag
Ancillary Packaging MaterialsExpanded Polystyrene
Gross Weight10.78kg (23.77lbs)
Minimum Packaging Quantity1pc
Transportation CartonCarton Packaging
Transportation Carton MaterialCorrugated Carton
Transportation Carton Dimensions(1)38x36x19cm (14.961x14.173x7.480″)
Transportation Carton Dimensions(2)46x30.5x25.5cm (18.110x12.008x10.039″)
Transportation Carton Dimensions(3)12.8x10.7x5.6cm (5.039x4.212x2.204″)
Total Gross Weight of Transportation(kilogram)10.78
Total Gross Weight of Transportation(pound)23.77
Quantity of One Transportation Carton3pc

Related Products